EDFA-C-PA-35-SM-M15/M20 EDFA Erbium doped Fiber Amplifier C-Band Pre-Amplifier 35dB EDFA SM Fiber Module type
Erbium doped fiber amplifier (EDFA) is a high performance, small size of the fiber amplifier products.
The internal use of stability high power semiconductor laser, the high stability of WDM, isolator,
and high gain erbium-doped fiber.
The product has the advantages of high reliability, high power output, high gain and low noise.
This is the ideal choice of high power EDFA system, this product uses 5V DC power supply, compact size, easy to integrate in the system to meet the needs of customers.
There are two types EDFA.(Current product is Pre-Amplifier type.)
Pre - Amplifier, referred to as PA, that is preamplifier, used in the -35 ~ -25 dBm range of small light signal amplification, typical gain of 35 dB;
Booster - Amplifier, referred to as BA, is used to enhance the power of the optical signal in the range of - 6 ~ +10 dBm, with a maximum output power of 27 dBm;
[Characteristic]
high reliability
Wide operating wavelength range
High gain, gain flatness is good
High output power
Good temperature adaptability
[Application]
Optical fiber communication
Optical fiber sensor
Optical fiber laser
[Specifications]
Parameters
|
Unit
|
Typical value
|
Remarks
|
Model
|
--
|
EDFA-C-PA-35-SM-M15/M20
|
EDFA-C-PA-45-SM-M15/M20
|
Current Product is EDFA-PA-35
|
Wavelength Range
|
nm
|
1530~1565
|
C-band
|
Input power
|
dBm
|
-35~-25
|
-45~-25
|
|
Small signal gain factor
|
dB
|
≥35
|
--
|
@-35dBm Input
|
Small signal gain factor
|
dB
|
--
|
≥45
|
@-45dBm Input
|
Noise index
|
dB
|
4.5
|
@-35dBm Input
|
Polarization dependent gain
|
dB
|
<0.3
|
|
Polarization mode dispersion
|
ps
|
0.5
|
|
Input/output isolation
|
dB
|
>35
|
|
Pigtail fiber type
|
--
|
SMF-28 Single Mode fiber
|
L=1m
|
Pigtail connector type
|
--
|
FC/APC
|
|
Work mode
|
--
|
ACC/APP
|
Automatic current control/
Automatic power control
|
Electrical and environmental parameters
|
Desktop Type
|
Module Type
(Current product)
|
Control method
|
Button
|
RS232 Serial communication
|
Communication interface
|
DB9 Female(Default not include)
|
DB9 Female For M20
XH1.5-3Pin For M15
|
Power supply
|
AC 100~240V
|
DC 5V, 3A
|
Size
|
260(W)×280(D)×120(H)mm
|
125(W)×150(D)×20(H)mm
90(W)×70(D)×15(H)mm (Choose)
|
Operating temperature range
|
-5~+35°C
|
Operating humidity range
|
0~70%
|
Note:
*Note 1: This EDFA product is designed for single wavelength signal input within the operating wavelength range, regardless of the gain spectrum flatness when multiple wavelengths are input simultaneously. As shown on this page, the EDFA-C-PA-35 small signal amplifier can achieve high gain amplification for input signals of different wavelengths in the C-band (multiple wavelengths are not simultaneously input to the EDFA in the figure), and the input power of a single wavelength is -35dBm , the effective gain is greater than 35dB, and the amplified signal-to-background noise ratio is greater than 30dB.