ASE-C-F2-30-T-SM-M10 1528~1569nm 30mW ASE Broadband Light Source Micro-Module 45x60x10mm
This light source product offers a complete spectrum covering traditional C-band wavelengths, with a spectral flatness of approximately 1.5-2dB. Its maximum output optical power is 50mW, and this power is adjustable. It is output via single-mode fiber. This light source module (M10) maintains the optical specifications of a standard C-band ASE light source module, yet boasts an optimized design with a reduced footprint of 45mm (W) × 60mm (D) × 10mm (H), representing a reduction of over two-thirds compared to the M15 module. This makes it particularly suitable for integration into systems such as fiber-optic sensing.
[Features]
Small size
Adjustable power
Wide spectral range
Spectrally flat
[Applications]
Fiber optic sensing
Medical imaging
Fiber optic communications
[Specification]
|
Parameters
|
Unit
|
Typical value
|
Remarks
|
|
Model
|
--
|
ASE-C-F2-30-T-SM-M10
|
|
|
Spectral Range(2dB)
|
nm
|
1528~1569
|
±0.5nm tolerance
|
|
Spectral Width
|
nm
|
≥41
|
±0.5nm tolerance
|
|
Ouput Power
|
mW
|
30
|
|
|
Spectral Power Density
|
dBm/nm
|
-1.2
|
Average value
|
|
Power Adjustment Range
|
--
|
10%~100%
|
Power adjustable and flatness maintained
|
|
Spectral Flatness
|
dB
|
≤ 2
|
|
|
Output Isolation
|
dB
|
>35
|
|
|
Short-term Stability (15 minutes)
|
dB
|
≤ ±0.02
|
Equivalent≤±0.5%
|
|
Long-term Stability (8 hours)
|
dB
|
≤ ±0.05
|
Equivalent≤±1.2%
|
|
Polarization State
|
--
|
Completely unpolarized
|
Random polarization
|
|
Polarization Extinction Ratio
|
dB
|
≤ 0.2
|
|
|
Pigtail Type
|
--
|
SMF-28 Single mode fiber
|
|
|
Pigtail Connector Type
|
--
|
FC/APC
|
|
|
Electrical and Environmental Parameters
|
Module Type
|
|
Control Method
|
RS232 serial communication (power and light output can be turned on and off by software control)
|
|
Communication Interface
|
ZH1.5-6PIN port
|
|
Power Supply
|
DC 5V1.2A
|
|
Power Wiring Method
|
1. The default length is 35cm, with a UT2.5-4 fork terminal at the end, and the inner diameter of the fork connector is 4mm.
|
|
2. The default length is 35cm, with a 5.5/2.1mm power interface at the end, and a power adapter.
|
|
Size
|
M10: 45(W)×60(D)×10(H)mm
|
|
Operating Temperature Range
|
-5~+35°C
|
|
Operating Humidity Range
|
0~70%
|
.jpg)
Follow us on Twitter
Facebook page
CivilLaser YouTube