1550nm 10kW Nanosecond Pulse Fiber Laser Module HP-NSFL-A-1550-3/200-10-1/3000-SM-FA-M1-JBT
High-power nanosecond pulse fiber laser uses high-power gain fiber module, and cooperates with special drive and temperature control circuit to output high peak power and high energy pulse laser, with stable laser wavelength and power. It can be used for laser ranging radar, fiber optic sensing system, etc.
[Features]
Full fiber structure.
Pulse width, repetition frequency can be adjusted.
Pulse energy up to 100uJ.
[Applications]
Lidar
Laser ranging
Nonlinear optics
[Specification]
|
Parameters
|
Unit
|
Typical Value
|
Remarks
|
|
Model
|
--
|
HP-NSFL-A-1550-3/200-10-1/3000-SM-FA-M1-JBT
|
JBT: High and low temperature version
|
|
Central Wavelength
|
nm
|
1550
|
|
|
Wavelength Accuracy
|
nm
|
±1
|
|
|
Max. Single Pulse Energy
|
uJ
|
100
|
@Pulse frequency ≤ 10kHz, pulse width ≥ 10ns
|
|
Max. Output Peak Power
|
kW
|
10
|
@Pulse width 3ns, pulse frequency ≤10kHz
|
|
Max. Average Laser Power
|
W
|
2
|
@Pulse width ≥3ns, pulse frequency ≥100kHz
|
|
Pulse Width
|
ns
|
3~200 Adjustable
|
*1~3ns refers to the full width at half height, and >3ns refers to the full width at the bottom.
|
|
Repeat Frequency
|
kHz
|
1~3000 Adjustable
|
|
|
Beam Quality M²
|
--
|
≤1.1
|
Based on output collimator specifications.
|
|
Output Isolation
|
dB
|
≥30
|
|
|
Short-term Stability (15 minutes)
|
dB
|
≤ ±0.05
|
Equivalent ≤±1.2%
|
|
Long-term Stability (8 hours)
|
dB
|
≤ ±0.1
|
Equivalent ≤±2%
|
|
Output Laser Polarization State
|
--
|
Randomly
|
|
|
Pigtail Type
|
--
|
SMF-28 single-mode fiber
|
L=0.3m
|
|
Pigtail Connector Type
|
--
|
FC/APC
|
According to pulse peak power.
|
|
Electrical and environmental parameters
|
Module Type
|
|
Control method
|
RS232 Serial communication
|
|
Communication interface
|
DB9 Female
|
|
Trigger Method
|
TTL, internal/external trigger
(The default is internal trigger, which can be switched to external trigger through software.)
|
|
Power supply
|
DC 12V
|
|
Size
|
100(W)×100(D)×30(H)mm
|
|
Operating temperature range
|
-43~65℃
|
|
Operating humidity range
|
0~70%
|
Note-Trigger:
Trigger Method - External trigger： If it is an external trigger, it means that the customer needs to input a periodic clock signal to the laser source to trigger the laser light source from the outside in order to output a nanosecond periodic pulse signal.
Follow us on Twitter
Facebook page
CivilLaser YouTube