L-Band SM EDFA 33dBm 2W High Power Erbium-doped Fiber Amplifier EYDFA-L-HP-BA-33-SM-M Module Type

$5,876.00  $5,501.00
Save: 6% off

Add to Cart:


L-Band SM EDFA 33dBm 2W High Power Erbium-doped Fiber Amplifier EYDFA-L-HP-BA-33-SM-M Module Type

The L-band high-power erbium-doped fiber amplifier is based on the principle of laser amplification of optical signals in erbium-doped fibers. It adopts a dedicated multi-stage optical amplification design and a reliable high-power laser heat dissipation process to achieve high-power output of 1570~1605nm wavelength lasers. It has the advantages of high power and low noise, and can be used in optical fiber communication systems, optical fiber sensing, lidar, etc.

[Features]
High output power .
High gain factor.
Low noise.

[Applications]
Fiber communication
Fiber optic sensing
Lidar

[Specification]

Parameters

Unit

Typical Value

Remarks

Model

--

EYDFA-L-HP-BA-33-SM-M

 

Wavelength Range

nm

1570~1605

L-band

Input Power

dBm

-6~+10

 

Saturated Output Power

dBm

≥33

@-3dBm input

Output Power Adjustable Range --

10%~100%

 

Noise Figure

dB

<6.0

@-3dBm input

Polarization Dependent Gain

dB

<0.5

 

Polarization Mode Dispersion

ps

0.5

 

Input/Output Isolation

dB

>35

 

Pigtail Fiber Type

--

SMF-28 single-mode fiber

L=1m

Fiber Interface Type

--

FC/APC

 

Work Mode

--

ACC / APC

*Note1

 

 

Electrical and environmental parameters

DeskTop Type

Module Type
(Current product)

Control Method

Button

RS232 Serial communication

Communication Interface

DB9 Female
(Default not include)

DB9 Female

Power Supply

AC 100~240V

DC 12V, 3A

Size

260(W)×320(D)×120(H)mm

125(W)×150(D)×31.5(H)mm

Operating Temperature Range

-5~+35°C

Operating Humidity Range

0~70%

 
 
 

*Note1:
ACC mode - automatic current control: The EDFA pumping operating current is set by the user and automatically locked by the EDFA to achieve a constant pumping current. When the input optical power fluctuates, the output power will also fluctuate accordingly, which is suitable for all EDFA models.

APC mode - automatic power control: The signal light output power of the EDFA is set by the user, the PD automatically monitors and feeds back the output power, the EDFA control and the adaptive adjustment pump achieve the stability of the output signal. When the input optical power fluctuates, the APC mode minimizes the fluctuation of the output power and is suitable for power type and line type EDFA.

 
EDFA fiber amplifier

L band EDFA
 

Additional Images








wabusiness template