355nm 3000mW UV DPSS Laser Pulsed Laser With Power Supply

355nm 3000mW UV DPSS Laser Pulsed Laser With Power Supply

Note:
The parameters of each 355nm laser vary considerably during manufacturing. The parameters listed below are for illustrative purposes only and do not represent the final actual parameters.
Please communicate with us to confirm your specific requirements before placing an order. Each 355nm laser will be manufactured based on the final parameters confirmed by the customer.
If you place an order without confirming the parameters, we will only guarantee that the average power meets the requirements by default. Other parameters will be randomly combined, but we will try our best to approximate the parameters listed below.

[Specifications]
Product Name: 355nm UV laser pulsed laser with power supply
Lead Time: 2~4 weeks
Output Wavelength: 355nm±1nm
Output Power(Average): 3000mW@30KHz
Operating Mode: Pulsed laser
Single Pulse Energy: 100μJ@30kHz
Repeat frequency: 30~100kHz
Pulse Width: <20ns@30KHz
Spatial Mode: TEM00(M²<1.3)
Beam Diameter(1/e2): 0.5±0.1mm
Power Stability: <3% RMS over 8 hours
Pulse stability: <3% RMS over 10mins
Light spot stability: <50μrad
Beam Divergence: <2mrad (full angle)
Spot roundness: >90%
Control method: RS232, Gate, Trigger
Cooling method: Air-cooling
Polarization direction: Horizontal
Polarization: >100:1
Optimum Operating Temperature: 15~35℃
Relative humidity: 10% ~ 80%
Warm Up Time:<15 minutes
Operating Voltage: 90V ~ 260V
Warranty: 1 Year

Note:
From 2022.1.1, the model of 355nm 3w high power pulsed laser will be changed to the following size.

The following old models are only suitable for 355nm low-power pulsed lasers.