C-Band 40dBm High Power Erbium-doped Fiber Amplifier Module Type EYDFA-C-HP-BA-40-SM-M70

$9,889.00  $7,306.00
Save: 26% off

Add to Cart:


C-Band 40dBm High Power Erbium-doped Fiber Amplifier Module Type EYDFA-C-HP-BA-40-SM-M70

The high-power erbium-doped fiber amplifier (EYDFA-HP) utilizes the principle of stimulated light amplification of optical signals in erbium-ytterbium co-doped fiber. It utilizes a uniquely designed optical path and reliable high-power laser heat dissipation technology to achieve high-power laser output in the 1535-1565nm wavelength range. Its high power and low noise performance make it suitable for applications such as fiber-optic communications and lidar.

[Features]
High power
High gain coefficient
Wide wavelength range

[Application]
Fiber Optic Communications
Fiber Optic Sensing
Fiber Optic Laser

[Speicfictaion]

Parameter Unit Typical Value Remarks
Model   EYDFA-C-HP-BA-40-SM-M70  
Wavelength Range nm 1535~1565 C-band
Intput Power dBm -6~+10  
Saturated Output Power dBm 40 @-3dBm input
Output power adjustable range - 10%~100%  
Noise Index dB <6.0  
Gain Wavelength Non-Uniformity dB ≤1 @Different wavelengths are amplified separately
Polarization Dependent Gain dB ≤0.5  
Polarization Mode Dispersion ps 0.5  
Input/Output End Isolation dB >35  

Optical Power Monitoring

--

Input power monitoring;
Output power monitoring

 

Pigtail Type   SMF-28e single mode fiber L=1m
Pigtail Connector Type   FC/APC   
Operating Mode   ACC/APC *Note1

 

 

Electrical and Environmental Parameters

Desktop Type

Module Type
(Current Product)

Control Method

Touch screen/RS232 Serial communication

RS232 serial communication

Communication Interface

DB9 Female
(Default not include)

DB9 Female

Power Supply

AC 100~240V

12V DC

Size

376(W)×340(D)×112(H)mm

139(W)×235(D)×70(H)mm

Operating Temperature Range

-5~+35°C

Operating Humidity Range

0~70%

 
 

*Note1:
ACC mode - automatic current control: The EDFA pumping operating current is set by the user and automatically locked by the EDFA to achieve a constant pumping current. When the input optical power fluctuates, the output power will also fluctuate accordingly, which is suitable for all EDFA models.

APC mode - automatic power control: The signal light output power of the EDFA is set by the user, the PD automatically monitors and feeds back the output power, the EDFA control and the adaptive adjustment pump achieve the stability of the output signal. When the input optical power fluctuates, the APC mode minimizes the fluctuation of the output power and is suitable for power type and line type EDFA.

 

EDFA fiber amplifier

fiber amplifier

YDFA fiber amplifier

fiber amplifier

fiber amplifier

fiber amplifier

fiber amplifier

fiber amplifier

fiber amplifier






wabusiness template