Min & Micro EDFA Module C-Band EDFA-C-BA-13-SM-Mic 13dBm 20mW 50x50x15mm
Erbium-doped fiber power amplifier (BA, Booster-Amplifier) is usually used to increase the power of optical signals in the range of -6dBm~+3dBm or higher, with a maximum saturation power of 26dBm, which is usually used to increase the emission power of laser light sources.
[Features]
Wide wavelength range
High output power
Low noise
[Applications]
Optical Fiber Communication
Fiber optic sensing
Fiber laser
[Specifications]
Parameter |
Unit |
Typical value |
Remarks |
Model |
|
EDFA-C-BA-13-SM-Mic |
|
Wavelrngth Range |
nm |
1530~1565 |
C Band |
Input Power |
dBm |
-6~+3 |
|
Saturated Output Power |
dBm |
≥13 |
@-3dBm input |
Noise Index |
dB |
5.0 |
@-3dBm input |
Polarization Dependent Gain |
dB |
<0.3 |
|
Polarization Mode Dispersion |
ps |
0.5 |
|
Input/Output Isolation |
dB |
>35 |
|
Pigtail Fiber Type |
|
SMF-28 single-mode fiber |
Φ=900um, L=1m |
Fiber Interface Type |
|
FC/APC |
|
Working Mode |
|
ACC / APC |
*Note1 |
Control Method |
|
TTL serial communication |
RS232 serial communication can be customized. |
Communication Interface |
|
XH2.54-4PIN |
|
Power Supply |
|
DC 5V, 2A |
|
Size |
mm |
50(W)×50(D)×15(H) |
|
Operating Temperature |
°C |
-5~+35°C |
|
Operating Humidity Range |
|
0~70% |
|
*Note1:
ACC mode - automatic current control: The EDFA pumping operating current is set by the user and automatically locked by the EDFA to achieve a constant pumping current. When the input optical power fluctuates, the output power will also fluctuate accordingly, which is suitable for all EDFA models.
APC mode - automatic power control: The signal light output power of the EDFA is set by the user, the PD automatically monitors and feeds back the output power, the EDFA control and the adaptive adjustment pump achieve the stability of the output signal. When the input optical power fluctuates, the APC mode minimizes the fluctuation of the output power and is suitable for power type and line type EDFA.