C-Band 10W 40dBm High Power Single Mode Fiber Amplifier Desktop Type EYDFA-C-HP-BA-40-SM-B

Starting at: $10,114.00  $7,758.00
Save: 23% off

Please Choose:



Add to Cart:


C-Band 10W 40dBm High Power Single Mode Fiber Amplifier Desktop Type EYDFA-C-HP-BA-40-SM-B

High-power single-mode erbium-doped fiber amplifier (EYDFA-HP) is based on the principle of laser amplification of optical signals in erbium-doped fiber, using unique multi-stage optical amplification design and reliable high-power laser heat dissipation technology to achieve the wavelength range of 1540~1565nm Internal high-power laser output. It has the advantages of high power and low noise, and can be used for optical fiber communication, laser radar, etc.

[Features]
High output power.
High gain coefficient.
Wide wavelength range.

[Applications]
Optical fiber communication
Fiber optic sensing
Laser radar

[Speicfictaion]

Parameter Unit Typical Value Remarks
Model   EYDFA-C-HP-BA-40-SM-B  
Wavelength Range nm 1535~1565 C-band
Intput Power dBm -6~+10  
Saturated Output Power dBm 40 @-3dBm input
Output power adjustable range - 10%~100%  
Noise Index dB <6.0 @-3dBm input
Gain Flatness dB 1 @Different wavelengths are amplified separately
Polarization Dependent Gain dB <0.5  
Polarization Mode Dispersion ps 0.5  
Input/Output End Isolation dB >35  
Pigtail Type   SMF-28e single mode fiber L=1m
Pigtail Connector Type   FC/APC   
Operating Mode   ACC/APC *Note1

 

Electrical and Environmental Parameters

Desktop Type
(Current Product)

Module Type

Control Method

Button

RS232 serial communication

Communication Interface

DB9 Female
(Default not include)

DB9 Female

Power Supply

AC 100~240V

DC 12V, 13A

Size

260(W)×320(D)×120(H)mm

139(W)×235(D)×70(H)mm

Operating Temperature Range

-5~+35°C

Operating Humidity Range

0~70%

 

*Note1:
ACC mode - automatic current control: The EDFA pumping operating current is set by the user and automatically locked by the EDFA to achieve a constant pumping current. When the input optical power fluctuates, the output power will also fluctuate accordingly, which is suitable for all EDFA models.

APC mode - automatic power control: The signal light output power of the EDFA is set by the user, the PD automatically monitors and feeds back the output power, the EDFA control and the adaptive adjustment pump achieve the stability of the output signal. When the input optical power fluctuates, the APC mode minimizes the fluctuation of the output power and is suitable for power type and line type EDFA.

 

System architecture diagram:
Erbium-doped Fiber Amplifier EDFA

High power Erbium-doped Fiber Amplifier EDFA

C band EDFA

C band EDFA






wabusiness template