Single Mode FBT Fiber Optic Splitter 1/2 Without connector
At its most basic, the FBT splitter, short for fused biconical taper splitter, is a passive device that divides an input optical signal into unequal portions, and then send out the divided signals to separate users. FBT technology has become mature after developing for about 20 years. The FBT splitter is now much cheaper to manufacture, and has been widely used in FTTx systems, MANs, WANs, CATV, and active devices.
Single mode FBT splitter from our company has wide bandwidth, suitable for incoming signals with wavelengths ranging from 1,260nm to 1,650nm. This range of fiber optic splitter has a small physical size, available in different packages.
Currently available single mode FBT splitters are 1×2, 2×2, 1×3, and 1×4 types. The product can be tailored to your specific requirements.
[Features]
1. This type of FBT splitter is built to the Telcordia GR-1209-CORE and Telcordia GR-1221-CORE standards. It is interchangeable with many other optical fiber splitters made to the same standards.
2. Low insertion loss
3. High reliability
4. Meet the IEC and RoHS requirements
[Applications]
1. CATV
2. Active devices
3. Optical fiber communication system
4. LANs, WANs
5. Telecommunication network
6. EPON/GPON
7. FTTx
Specifications of the Single Mode FBT Splitter
| Parameter |
P grade |
A grade |
Unit |
| Port Type |
1x2 or 2x2 |
| Operating Wavelength |
1310 ± 40 & 1550 ± 40 |
nm |
| Maximum Insertion Loss |
3.5 |
3.7 |
dB |
| Return Loss |
≥55 |
dB |
| Additional Loss |
≤0.15 |
≤0.20 |
dB |
| Return Loss Uniformity |
0.4 |
0.7 |
dB |
| Polarization Dependent Loss |
≤0.10 |
≤0.15 |
dB |
| Directivity |
≥55 |
dB |
| Fiber Type |
Corning SMF-28e |
/ |
| Operating Temperature |
40~+85 |
℃ |
| Storage Temperature |
40~+85 |
℃ |
| Fiber Type |
Bare fiber |
0.9mm loose tube |
2.0 or 3.0mm loose tube |
mm |
| Package Type |
Type one |
Type two |
/ |
Single Mode Double Window Splitter (1310/1550nm)
| Split Ratio |
Insertion loss P grade |
Insertion loss A grade |
Unit |
| 50/50 |
3.5 |
3.7 |
dB |
| 45/55 |
3.9/2.9 |
4.2/3.1 |
dB |
| 40/60 |
4.7/2.7 |
5.0/2.9 |
dB |
| 30/70 |
6.0/1.9 |
6.4/2.2 |
dB |
| 20/80 |
7.9/1.2 |
8.5/1.4 |
dB |
| 10/90 |
11.3/0.6 |
12.7/0.8 |
dB |
| 5/95 |
16.0/0.5 |
16.0/0.5 |
dB |
| 1/99 |
23.5/0.3 |
24.0/0.4 |
dB |
Single Mode Single Window Splitter
| Split Ratio |
Insertion loss P grade |
Insertion loss A grade |
Unit |
| 50/50 |
3.6 |
3.7 |
dB |
| 45/55 |
3.8/2.8 |
4.0/3.0 |
dB |
| 40/60 |
4.4/2.5 |
4.8/2.8 |
dB |
| 30/70 |
5.6/1.8 |
6.1/2.0 |
dB |
| 20/80 |
7.6/1.2 |
8.0/1.3 |
dB |
| 10/90 |
10.8/0.6 |
12.0/0.8 |
dB |
| 5/95 |
14.0/0.4 |
14.5/0.5 |
dB |
| 1/99 |
21.0/0.2 |
21.5/0.3 |
dB |
Package Type One: Bare Fiber or 0.9mm Loose Tube
Package Type Two: 2mm Loose Tube
Follow us on Twitter
Facebook page
CivilLaser YouTube